Zonet ZPS2102 Instruction Manual download pdf (Page 60)

Configuration from Embedded Web Server

5 - 25

SNMP Setup

TCP/IP networks use a standard management

protocol called Simple Network Management Protocol

(SNMP). SNMP is widely used in the industry as a solution

for remote network management and monitoring of

networking devices. SNMP actually includes a protocol, a

database structure specification, and a set of database

objects. The database objects are contained in a standard

database called Management Information Base (MIB) that

is stored on the networking device called SNMP agent. The

print server's SNMP implementation runs in a TCP/IP

environment.

A host on the network running Network Management

System (NMS) software can access the print server device

by reading and writing the MIB objects stored in the device.

The Network Management Systems are available from

many third-party vendors, such as Hewlett-Packard's

OpenView.

When accessing (traversing) MIB objects in the print

server using NMS software called SNMP manager, you

need to provide a community name in each SNMP request

for authentication purpose. The print server supports up to

two community names. The default community name is

public (case-sensitive), with Read Only access right in

default.

When an unusual condition or activity occurs, the

SNMP agent alerts the SNMP manager through SNMP

traps. Following list summaries SNMP trap messages that

the print server will send out.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 121 122

No comments

Zonet ZPS2102 Instruction Manual Page 60