Zonet ZPS2102 Instruction Manual download pdf (Page 110)

Troubleshooting

9 - 7

Moving the Print Server to A New

Segment

If the print server is moved from one network segment to

another after the initial installation, through the Network

Print Port, the print server must be reconfigured on the

original Windows NT server or on each Windows 95/98

computer using this print server in order for the print

server’s driver on each computer to re-establish a new

connection.

Print Server Reconfiguration Procedure on

Windows 95/98/Me

1. Click Start on the bottom left hand corner of the

screen.

2. Select Settings and select Printers.

3. Select your printer connected to the print server, and

right-click the printer icon. Select Properties.

4. Click Details tab.

5. Click Port Settings as shown in the picture below.

The print server will be displayed on the next print

server’s configuration screen.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 121 122

No comments

Zonet ZPS2102 Instruction Manual Page 110