Zonet ZSR4134WE Specifications download pdf (Page 40)

Port Trigger Settings

When internal clients have access to external server in the Internet for some

applications, the clients request to connect with severs, and the server will also

ask to connect with client. But in the default setting, ZSR4134WE will refuse to

accept any request from WAN, which will bring communication halt. The port

triggering is used to define triggering rules. So when clients have access to the

server, the device will open the port through which the server sends the request

to client.

 IP Range: The internal IP address range for requesting external server

application.

 Trigger Port: The port range through which the internal clients send

request traffics to external server with the range of 1～65535. Note that the

low number first and two blanks can keep the same number if needed.

 External Port: The port range through which the external server send

request traffics to internal clients with the range of 1～65535. Note that the

low number first and two blanks can keep the same number if needed.

 Apply: Select the checkbox to enable the rule.

 Add: After edit the rule, click the “add” button to add the current entry to

port triggering list.

NOTE: The special application can be only used in one PC. If there is more than one PC

to open the same triggering port, the external port will be connected to the last

PC for the application.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 56 57

No comments

Zonet ZSR4134WE Specifications Page 40