Zonet ZFS3018P Installation Guide download pdf (Page 5)

1. Check the power adapter and power wall-jet to make sure they are function

properly. Check if the switch is turned-ON and power LED is steady.

2. Check all cable connections between computer and the switch to make sure

they are connected properly.

3. Maximum distance is 100 meters from the switch to end nodes.

4. Link LED(s) is ON/flashing at the connected port(s) of the switch.

5. Test your computer’s network adapter to make sure it is installed and functioned

properly.

6. Check issues such as network collisions, domain limitations, and other physical

installation aspects. Make sure they all meet IEEE standard network

installation requirements, more details can be found at www.ieee.org.

7. If problem still persists, write down your software/hardware configuration and

LED error indications and contact your local retailer or the store purchased for

further assistance.

8. If the provided power adapter is missing, purchase 9V / 600mA power adapter

for replacement.

1 2 3 4 5

No comments

Zonet ZFS3018P Installation Guide Page 5